首先，要了解烧结砖的全国布局。

First of all, we should understand the national layout of the sintered bricks.

其次，要了解烧结砖的品质情况。

Secondly, the quality of the sintered brick should be understood.

第三，要根据工程设计要求针对性地采购。有的工程是高档小区景观，那必须采用高端产品；有些工程要求合格就行，那就买个中端质地；建议尽量不要选用低端产品，一方面低端产品有各种各样的质量缺陷，容易出现质量问题，再便宜买回去，省了钱也没好；另一方面，烧结砖在整个景观中所占的份额很小，一般一个景观项目总投资少则四五佰万，多则上千万，烧结砖有50万算多的了。总之，根据项目要求，选择不同档次的砖，是明智之举。曾经内蒙呼市一个项目，人家老总要求样品送检，谁的强度最高抗冻最好，就用谁家的砖。这是最负责也最靠谱的做法，值得大家效仿。

Third, it is necessary to purchase according to the requirements of the engineering design. Some engineering is a high-end residential landscape, it must be used in high-end products; some engineering requirements on the line, then buy the end of texture; don't try to suggest a selection of low-end products, low-end products have a variety of quality defects, prone to quality problems, and then go back and buy cheap, saving money is not good; the other hand, brick in the whole landscape of the share is very small, generally a landscape project with a total investment of less Siwubaiwan, more than ten million, there are 500 thousand more bricks. In a word, it is wise to choose different grades of bricks according to the requirements of the project. Once Inner Mongolia Hohhot a project manager who asked people samples for inspection, the highest strength antifreeze best, who will use a brick. This is the most responsible and reliable practice, and it is worth copying.

第四，要亲自置身现厂实地考察。厂家送样，都是经过认真挑选的，样品都很好。这无可厚非，谁都一样。但绝对不能百分之分的相信样品，一定要到厂里考察，考察什么呢？好多客户不知道考察啥？只是到厂家泛泛看看。考察就是要看四个方面：一看营业执照，目的是区分是生产厂家还是经销商。生产厂家，营业执照上会注明生产及销售；经销商，营业执照上注明的是销售。二看生产设备，生产设备的压力多大，数量多少，一定要记住“好设备才能生产出好产品”。 三看窑炉，有几条隧道窑，每条生产能力多大，就能算出生产规模，看能否保证工期所需。四看大货。单看一块砖看不出好坏，要看整托的砖，看成批量的砖，这样才能对砖的品质有所把握，才能做到心中有数。

Fourth, it is necessary to make a field investigation in the present factory in person. The samples are carefully selected and the samples are very good. It's nothing wrong, everyone is the same. But it is absolutely impossible to believe that the sample of a hundred percent is sure to be inspecting in the factory. What is the investigation? Many customers do not know what to inspect? Just go to the factory and look at it. Inspection is to look at four aspects: a business license, the purpose of which is to distinguish between a manufacturer or a distributor. The manufacturer, the business license will indicate the production and sale; the dealer and the business license indicate the sale. Two look at the production equipment, the production equipment pressure is much, the quantity is much, must remember "good equipment can produce good product". Three to see the kiln, there are several tunnel kilns, each of the production capacity, can calculate the scale of production, see whether it can guarantee the time needed. Four look at the big goods. A single piece of brick can not see the good or bad, to see the whole brick, as a batch of bricks, so that the quality of the brick can be grasped, can be able to do a good number of things.